Design
Plate heat exchangers type XPS consist of two separate pressure rooms.
One side consists of a plate pack, made from corrugated plates which are welded together alternately at the circumference or port holes.
Each two plates form a plate channel. All welds of the plate package are made with laser welding technology.
The second pressure room consists of a shell tube. This shell tube can be carried out as fully welded on both sides or as one-sided/two-sided openable model.
Flow directors at the shell side prevent bypass flow between shell and plate package.
Design and functional principle allows many adaptations. We would like to explain these in individual discussions with you according to your needs.
XPS heat exchangers are available with three different corrugation patterns.
Plates with a flat corrugation angle (H plates) allow high heat transfer rates caused by a highly turbulent flow.
Plates with a steep corrugation angle (L plates) are used in applications which have to be optimized for pressure loss.
In gas/gas applications or in slightly contaminated media plates with a greater channel cross-section (G plates) are used.
fully welded
accessible from one end
accessible from both ends
